Despatch Protocol Manager with Protocol 3 and Protocol Plus - Manual (Page 26)

I NSTALLATION & S ETUP Protocol Manager Instruction Manual
26 Version 1
Copyright © 2013 by Despatch Industries.
All rights reserved. No part of the contents of this manual may be reproduced, copied or transmitted in any form or by any
means including graphic, electronic, or mechanical methods or photocopying, recording, or information storage and
retrieval systems without the written permission of Despatch Industries, unless for purchaser's personal use.
3.7. Set Up Initial Recipe
Recipes establish time and temperature instructions for each controller. Setting up
Protocol Manager involves configuring recipes and then selecting the proper recipe for
each use. Creating recipes with the Protocol 3 controller follows a different process then
creating recipes with the Protocol Plus controller.
3.7.1. Set Up Initial Recipe: Protocol 3
3.7.1.1. Configure Initial Recipe: Protocol 3
Create a recipe by clicking on Window and selecting
Recipe/Datalog for Pr3 (Figure 21). The Recipe Editor
Screen will appear (Figure 22).
Double click any field on the
Recipe Editor screen to
access an editing window. Move the slider or click in the
white space or on the arrows to set the appropriate value. Click
OK to save the value ( Cancel to
delete). See Table 4 for the complete list of fields, descriptions and parameters. See the Protocol
3 Programmer’s manual for
a sample profile.
Figure 21. Configure a recipe.
Figure 22. Protocol 3 Recipe Editor.