Det-Tronics 000499-142 DVR, 16 Camera, 500GB (GE Security) - Manual (Page 77)

Chapter 7: System settings
TruVision DVR 30 User Manual 73
Table 13: Hard Drives screen commands and options
Commands and options Descriptions
Auto Delete Selects the number of days when the system deletes data
automatically
Overwrite Select On to automatically overwrite data when the hard drive reaches
its capacity
Disk Drives Displays the Disk Drive screen. This screen lets you add, remove, format,
and repair disk drives installed in your device. [1]
Network Attached Storages Displays the Network Attached Storages screen
Total Storage Displays the total hard drive space
Free Capacity Displays the amount of available space in the hard drive
[1] The Repair option under Disk Drives fixes file system errors..
Importing and exporting configuration settings
Use the Configuration screen to import or export configuration settings. Click Export
Config to export the TVR 30’s configuration settings into a configuration file. Click
Import Config to import configuration settings from a file. This screen also lets you
restore the TVR 30 settings to factory defaults.
Boot log
The Boot Log screen displays your device’s information that is generated each time
your device boots up. A boot log helps you diagnose your system in case of problems.
Click Archive to save the boot log into a backup device.
Table 14 below describes the codes used in the system’s boot log.
Table 14: Boot log code descriptions
Code Value Description
Shutdown AppExit Use <ESC> + <ENTER> + <CH1> to terminate the AP
Shutdown PwrOff PwrOff
Shutdown Reboot From menu reboot
Boot PwrOn Powered On
Boot PwtFail Booted up but DVR was unexpectedly powered off
Boot Reboot Powered on via reboot