Deutz-Fahr Agrovector 35.7 - Manual (Page 93)

Section 5 - Attachments and Hitches
5-15 31200570
Carriage w/Forks
Description P/N
Carriage, 1225 mm (48 in).............................................. 1170028
JD Carriage, 1225 mm (48 in) .................................. 1001102554
Fork, Pallet 50x120x1200 mm (2x4.7x47.2 in) ............... 2340040
Fork, Pallet 50x100x1200 mm (2x4x47.2 in) .................. 2340041
Carriage, 1225 mm (48 in)........................................ 1001107333
Fork, Pallet 50x100x1200 mm (2x4x47.2 in) .............1001100911
Use Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-2.
The joystick (1) controls lift/lower and extend/retract movement of the boom.
The attachment tilt roller switch (2) controls fork tilt.
• Push roller switch down to tilt up.
• Push roller switch up to tilt down.
Installation Procedure:
Refer to “Attachment Installation” on page 5-7.
Equipment Damage Precautions:
• Do not use forks as a lever to pry material. Excessive prying forces could
damage forks or machine structure.
• Do not attempt to lift loads that are attached or connected to another object.
OZ0770
OAH1690
1 2