BoomGear MP-700 - Manual (Page 5)

7
Formatting
(After installing the program)
1.
In order to use the device's memory efficiently, please format the device
periodically.
2.
If you format the device, all of the files and folders on the device will be
deleted.
3.
For Windows 98 and Windows 98 SE, you must use the Install CD.
4.
On Windows ME, 2000, or XP, the device will automatically be
recognized as a "Removable Disk" and you can directly format the
device as follows:
5.
With the battery remove from the device, connect the device to the
USB port on your PC, and then press the '
❿/❙❙' button to power on
the device.
6.
You can right-click on the removable disk and select Format from the
popup menu, as shown below.
7.
If you are formatting as shown above, select "FAT" as the file system. If
you select "FAT32" to format the device, the device's memory
information will be displayed incorrectly. In such case, please re-format
the device using FAT.
8.
When the formatting is complete, click "Close" to close the Format
window.
9.
When the formatting is complete, disconnect the device from your PC,
install the battery, and then press the '
❿/❙❙' button. Once the device is
powered on, re-connect it to your PC.
6
1.
If the product is already connected to your PC, disconnect it.
2.
Execute “Control Panel” ➞ “Add or Remove Programs” to see a list of
the installed programs.
3.
Search the list for 'Digital LiveMusic_H Audio Player' and click on the
“Change/Remove” button. A window will appear as shown below. click
"OK" and “Finish” to complete the deletion. Restart your computer after
deletion.
4.
If the installation was not successful or if you need to reinstall the
program for any reason, follow the program deletion procedure and put
the CD-ROM in for installation.
Program Deletion
● If you want to delete the TTS program, execute 'Control
Panel'
➞ 'Add or Remove Programs’. Then search the
list for 'TTSPad 2.0' and click “Change/Remove” to start
deleting.