Bush Hog 2012 - Manual

Bush Hog
®
TOUGH
2012 Series Rotary Cutters
BUSH HOG ® TOUGH FeaTUReS
TOUGH 10 Gauge Deck Construction
TOUGH 5 Year Gearbox Limited Warranty
TOUGH 7 Gauge Sidebands
TOUGH Replaceable Wide Skids
TOUGH Cushioned axle arms
TOUGH Powder Coat Paint
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Page 21
MODeL 2012
Cutting Width 11 ft 9 inches
Dimensions (width x length) 12 ft 2 inches x 10 ft (Lift), 12 ft 2 inches x 13 ft 4 inches (Pull)
Type Hitch 3 Point Cat. II & III Standard & Quick Hitch, Center Pull Self Leveling or Semi-Mount, Cat.II & III
Cutting Capacity 2 inches
Cutting Height 2 to 12 inches
Deck Thickness 10 gauge
Side Bands 7 gauge /10 inches deep
Minimum Tractor HP 60 PTO (Pull), 70 PTO (Lift)
Driveline ASAE Category 4
Cross Shaft Rubber Element
Gearbox HP 120 Main and 90 Outboard
Tractor PTO Speed 540/1000 RPM
Driveline Protection 4 Plate PTO Slip Clutch
Height adjustment Choice of Manual Height Bundle or Hydraulic Cylinder
Blade Holder(s) Round Pans
Blades 1/2 x 4 inches - Corner Uplift
Blade Tip Speed 15,490 FPM/540 RPM; 15,422 FPM/1000 RPM
Tires Laminated Tire on Lift and Semi-Mount Models, Laminated Tire or 15 inch Automotive Wheel on Pull Models, Used Aircraft Tire on Pull Type Only
axles Adjustable Axle Arms for Row Spacing, Choice of Single or Dual Axles on Pull Models
Deflectors Front Belting and Rear Bands (Chains Optional)
Safety Tow Chain Standard for Pull Models
approximate Weight 2184 lbs (Lift), 2267 lbs (Pull), 2079 lbs (Semi-Mount)
Options Single Row Chain Deflector Front and Rear
Warranty 1 year limited warranty with a 5 year gearbox limited warranty
FeaTUReS • Sloped Deck • High blade tip speeds • Deep sidebands • Quick detach gearbox shields