BUSH High Definition Digital Set Top Box With USB Record DFTA46R - Manual (Page 7)

Front and Rear Panel
1. Front panel
1 STANDBY INDICATOR: Shows you the power state of the set top box,
the LED will turn red if the set top box is in standby mode and Green if it
is on.
2 REMOTE CONTROL SENSOR: Used to receive the signal from the
remote control.
3 USB Input: Allows you to connect your USB device to record or play
files.
4 LED DISPLAY WINDOW: Used to display current channel number.
1 RF IN: This socket connects to your external aerial.
2 RF LOOP THROUGH: This socket will bypass the RF signal to either
your TV or another video system.
3 COAXIAL: This socket connects to a coaxial socket on your surround
sound system.
4 HDMI OUT: This socket connects to HDMI device to allow high
definition output.
5 VIDEO: This socket allows you to connect your Set Top Box via
Composite Video Signal.
6 These sockets connect to your TV
component input terminals.
7 AUDIO L/R: This socket allows you to connect your Set Top Box to
receive the Audio L/R signal.
8 MAINS CABLE: This is used to connect to your main power supply.
COMPONENT VIDEO OUT:
2. Rear panel
6
4
POWER SUPPLY: AC 230V ~ 50Hz
MAX POWER CONSUMPTION: 6 WATTS
BUSH WARRANTY: 1800 509 394 AUSTRALIA
BUSH WARRANTY: 0800 450 259 NEW ZEALAND
Serial No.:
DFTA46R/A
N14119
MADE IN PRC
AC 230V
~50Hz
2011/10