Dreams Aspen Walnut Bedstead - Manual (Page 4)

4 of 5
ASSEMBLY
NOTE: Slats not supplied shown
for reference only.
Both slats on
“step 3---step 6”
can be assembled to the
bedstead. You can make a
choice between the two slats.
1) Support leg height have the four
position, you can adjust according to the
bed height to choose the right position to
fix in the “STEP 3”.
2) If need, you can adjust by screwing in or
out the support leg leveler at the bottom.
1) Use the 8 pcs bolts, supplied with the
slat frame to fix the leg onto the slats
frame.
STEP 3
STEP 4
○
1
○
2
○
3
○
4
Select correct height for your bedstead