How to use – Black & Decker SteamXpress AS200 User Manual
Page 3
4
3
Product may vary slightly from what is illustrated.
How to Use
this appliance is for household use only.
GETTING STARTED
Remove any labels, stickers or tags attached to the body or soleplate of the iron.
Note: use ordinary tap water for ironing. do not use water processed through
a home softening system.
FILLING THE WATER TANK:
1. open the water-fill cover (A).
2. tilt the iron and using a clean measuring cup, pour water into
opening until it reaches the MaX level mark on the side of the
water tank (B). do not overfill.
3. close the water-fill cover.
4. Plug in the iron. the Power on indicator light comes on (C).
5. Follow the instructions for steaM iRoninG or dRY
iRoninG.
STEAM IRONING
1. Move the dry/steam selector to the desired steam level (D).
2. Read garment’s label to help you determine fabric type. turn
the fabric-select dial to appropriate setting (between
4 and 6) for your fabric (E). the temperature ready light glows
until it reaches the appropriate temperature. it then cycles on
and off during ironing.
Tip: if unsure of a garment’s fiber, test a small area (on an inside
seam or hem) before ironing.
3. For optimum performance, let the iron stand for 90 seconds before beginning
to iron.
4. When finished ironing, turn the fabric-select dial to lowest heat setting, move
the selector to and unplug the iron.
Note: if you need to add water while ironing, unplug the iron and follow above
steps.
Important: Always stand the iron on its heel rest when powered on but not in
use.
DRY IRONING
1. Make sure dry/steam selector is set to . You may want to empty the water (see
“eMPtYinG tHe WateR tanK”).
1. Spray nozzle
2. Water-fill cover
3. Dry/steam selector
4. Spray button
5. Steam button
6. Power On/Auto Off indicator light
7. Comfort Grip™ handle
8. Heel rest
9. Temperature-ready light
10. Fabric-select dial
11. Water tank
12. AUTO CLEAN
®
button
13. Soleplate
CLEAN
MAX
MIN
CLEAN
MAX
MIN
Dry
Steam/Surge of Steam
Spray
Symbols
B
C
D
E