Eberspacher Operation Unit - Manual

Eberspächer
J. Eberspächer
GmbH & Co. KG
Eberspächerstr. 24
D-73730 Esslingen
Telefon (zentral)
(0711) 939-00
Telefax
(0711) 939-0500
www.eberspaecher.com
25 1895 90 92 84 12.2004 Subject to changes Printed in Germany © J. Eberspächer GmbH & Co. KG
Operating unit
Operating instructions
Control device – heating (without ventilation) Control device – heating / ventilation
The control device allows you to adjust the heater
installed in the vehicle to the temperatures you require
and also to ventilate the vehicle interior.
Functions of the control device
Red fi eld
„Heating“ – turning to the right results in higher heat
output.
Position 0
„Off“ – after switch off automatic delayed shutoff for
cooling down.
Blue fi eld
"Ventilation" (if provided).
Illuminated fi eld in knob
• When vehicle lights are on – red display.
• In heating operation – green display (pilot light).
• In the event of faults various fl ashing lights, consult
workshop (if provided).
• In the event of overheating – steady green fl ashing
(if provided).
Self-help in the event of trouble
Non-starting
Switch off and back again. Not more than twice.
Check fuse. Consult workshop.
Overheating
Remove cause (e. g. blockage of hot air ducts). Switch
off and back on again. Not more than twice.
• The specifi cations and safety instructions stated in
the Technical Description of the heater must always
be observed and heeded.
• For operation in combination with the heater timer,
see operating instructions "Heater timer".
Please note!