2 adjustment and operation, Operation with landline or mobile phone, Call calltronic – Eberspacher Calltronic User Manual
Page 5: Adjustment and operation
VehiCLe heATeRs – TeChniCAL DOCuMenTATiOn | 5
call calltroNic
your network operator issued you with a
phone number for the Calltronic.
use the landline / mobile phone to dial the
phone number of your Calltronic. The phone
number must be saved in the Calltronic
beforehand, see
. After the call has
successfully been set up, the call from the
Calltronic is confirmed in the form of a tone
(factory setting), see
.
The Calltronic confirms a call to switch
on the heater with three tones.
The Calltronic confirms a call to switch
off the heater with two tones.
After the connection has been discon-
nected, the heater starts, heating period 60
minutes (factory setting). The control lamp,
installed in the button, lights up.
PlEasE NotE!
With the factory settings, Calltronic tone
feedback is only possible if using saved
phone numbers, see
The phone numbers must be configured by
the user beforehand.
in the case of calls without saved phone
numbers the connection is ended without
tone feedback, the heater state remains
unchanged.
oPEratioN with laNDliNE or mobilE
PhoNE
After the authorised landline / mobile phone
numbers have been entered, the Calltronic
is immediately fully functional with the pre-
set factory setting.
To do this, execute the input command
“1234ACCLiM:XXXXXX” once, see
it is possible:
to directly switch the heater On or OFF
with a phone call.
to switch the heater On or OFF with an
sMs.
to preselect starting of the heater within
24 hours with an sMs.
to have the input command confirmed
with a feedback sMs.
PlEasE NotE!
The Calltronic can save up to 5 phone
numbers, see
Calls, sMs and a feedback message by
sMs are all subject to charges.
2 ADjusTMenT AnD OpeRATiOn