ECOXGEAR IR1000: Innovator - Manual (Page 36)

36 Grace Wireless Internet Radio
<Language>
Allows you to change the display language.
<Factory Reset>
Puts all the settings back to their defaults as they were when the unit left the factory. If you
perform a factory reset on your radio you will lose all your presets and your wireless network
connection.
Please note that your radio’s serial number will still be registered with your Grace Digital
internet radio account (assuming you already registered the radio). Any premium station
passwords, my stuff stations and podcast that were saved on our web site will be saved
all be reassociated with your radio after you power back on, log onto your network and
download a new stations list.
<Register>
This will display a key that can be used to register the radio on the Grace Digital Audio
Customer portal: http://iradio.gracedigitalaudio.com/
<Clock Setup>
Use this option to set the time, to set an alarm and to view the current alarm setting, see
“Setting the alarm”.
<Upgrade Firmware>
Use this option to download new firmware for the radio from the Grace Digital Audio portal
on the Internet. If there is new firmware available, then the radio will prompt you if you want
to download it or not. Note, at this stage, you can press the radio’s ‘Back’ button to cancel
the radio beginning a firmware upgrade. A Firmware upgrade may take several minutes,
so do not switch off the power to the radio until the operation is complete otherwise
the radio may become permanently damaged.