ECOXGEAR IR2600: Innovator X - Manual (Page 42)

42
The Media Player allows you to play unprotected audio files (AAC, AIFF, MP3, RM, WAV, WMA) and
play lists (M3U) stored on a networked PC. Verified to work on Windows 2000 and Windows XP.
Settings Menu
Choosing desired option from the Configure menu
1. Press the ‘Select’ button.
(Note: if you make a mistake at any point, press the ‘Back’ button to go back to the previous screen.)
2. Turn the knob until ‘Settings’ is displayed
3. Press the ‘Select’ button.
4. Turn the knob until the display shows the option you want.
5. Press the ‘Select’ button to choose the option shown on the display. The options are explained below.
<Network Config>
Enables you to scan again for connection to another wireless network, or to manually configure the
network parameters. Use this if you take the Internet radio to another building where you want to use it,
or if you change your wireless router.
<Upgrade Firmware>
Use this option to download new firmware for the radio from the Grace Digital Audio portal on the
Internet. If there is new firmware available, then the radio will prompt you if you want to download it or
not. Note, at this stage, you can press the radio’s ‘Back’ button to cancel the radio beginning a firmware
upgrade. A Firmware upgrade may take several minutes, so do not switch off the power to the radio until
the operation is complete otherwise the radio may become permanently damaged.
<Language>
Allows you to change the display language.