Safety precautions – Behringer HA4700 User Manual

Page 2

Advertising
background image

POWERPLAY PRO-XL HA4700/PRO-8 HA8000

2

DETAILED SAFETY INSTRUCTIONS:

All the safety and operation instructions should be read before

the device is operated.
Retain Instructions:

The safety and operating instructions should be retained for

future reference.
Heed Warnings:

All warnings on the device and in the operating instructions

should be adhered to.
Follow instructions:
All operation and user instructions should be followed.
Water and Moisture:

The device should not be used near water (e.g. near a bathtub,

washbowl, kitchen sink, laundry tub, in a wet basement, near a

swimming pool etc.).
Ventilation:

The device should be situated so that its location or position

does not interfere with its proper ventilation. For example, the

device should not be placed on a bed, sofa, rug, or similar surface

that may block the ventilation openings, or used in a built-in

installation, such as a bookcase or cabinet that may impede the

flow of air through the ventilation openings.
Heat:

The device should be situated away from heat sources such as

radiators, heat registers, stoves, or other devices (including

amplifiers) that produce heat.
Power Source:

The device should only be connected to a power supply of the

type described in the operating instructions or on the device.
Grounding or Polarization:

This device must be grounded.

Power Cords:

Power cords should be routed so that they are not likely to be

walked on or pinched by items placed upon or against them, paying

particular attention to cords and plugs, sockets, outlets and the

point where they exit from the device.
Cleaning:

The device should be cleaned only as recommended by the

manufacturer.
Non-use Periods:

The power cord of the device should be unplugged from the

outlet when left unused for a long period of time.
Debris and Liquid Entry:

Debris and/or liquids should be kept from entering the enclosure

through openings.
Damage Requiring Service:

The device should be serviced by qualified service personnel

when:
s The power cord or the plug has been damaged; or
s Debris or liquid has entered the device; or
s The device has been exposed to rain; or
s The device does not appear to operate normally or exhibits a

marked change in performance; or

s The device has been dropped, or the enclosure damaged.
Servicing:

The user should not attempt to service the device beyond that

which is described in the operating instructions. All other servicing

should be referred to qualified service personnel.

This symbol, wherever it appears, alerts you to the

presence of uninsulated dangerous voltage inside

the enclosure—voltage that may be sufficient to

constitute a risk of shock.

This symbol, wherever it appears, alerts you to

important operating and maintenance instructions

in the accompanying literature. Please read the

manual.

CAUTION: To reduce the risk of electric shock, do not remove

the cover (or back). No user serviceable parts inside;

refer servicing to qualified personnel.

WARNING: To reduce the risk of fire or electric shock, do not

expose this device to rain and moisture.

SAFETY PRECAUTIONS

Advertising
This manual is related to the following products: