Bird Technologies AT-400 - Manual (Page 17)

Introduction
5
1. Sweep Rate
Indicator Blinks when sweeping.
2. Measurement Units Indicates selected measurement
units.
3. Trace Graphic display of measured
results across selected frequency
band.
4. Menu Select Key
Labels Defines function of menu select
keys located below the display.
5. Frequency Band
Scale Displays frequency band selected.
6. Cursor Used to select measurement
position on the trace.
7. Utility Label Area for displaying general data
(Lo Batt, Busy, Hold, Noise, and
test results).
8. Frequency Selected Frequency (for swept
mode this is frequency at the
cursor position).
9. Measured Value Numeric display of measured
value (for swept mode this is the
value at the cursor position).
10. Scale Displays user defined
measurement scale.
11. Pointer Moves across scale to show analog
type indication of measured
value.