Blaupunkt DX-R70 - Manual (Page 3)

3
INTRODUCTION NAVIGATION RADIO MODE CD MODE INDEX SETUP CD CHANGER
ENGLISH
DEUTSCH
DEUTSCH
DEUTSCH
1
button – opens the control panel.
2 Button to switch the unit on/off and operate the mute
volume function.
3
Volume control.
4 Macro button – programmable function button. For further
information, read the section entitled “Programming the
macro button” in the “Setup” chapter.
5 Dot matrix display.
6 If pressed briefly during navigation: the active destination
is displayed and the last voice output is repeated.
Entries that are marked with “…” in a list will be displayed
in their entirety.
7
Rocker switch. The way the rocker switch functions de-
pends on the individual menus or operating modes.
8
OK button, enter key.
9
T button – opens the TRAFFIC menu: TIM function
(Traffic Information Memory) and TMC traffic information
messages.
:
MENU button – to activate the setup menu.
; AUD button – opens the audio menu.
< ESC button – closes menus and deletes characters in
speller menus.
= Softkeys 4 to 6. The way the softkeys function depends
on the menu contents.
>
Softkeys 1 to 3. The way the softkeys function depends
on the menu contents.
? NAV button– activates navigation.
@
CD.C button – activates CD or CD-changer mode.
A
TUNE button – switches to radio mode.