Briggs & Stratton 470000 - Manual (Page 15)

15
ADJUSTMENTS
WARNING Disconnect spark plug and battery before performing adjustments.
REMOTE CONTROL ADJUSTMENTS
MODEL 4700000
Throttle control adjustment
REMOTE CHOKE CASING
CLAMP SCREW
CHOKE
LEVER
THROTTLE LEVER
THROTTLE WIRE AND CASING
THROTTLE CASING CLAMP SCREW
THROTTLE STOP
[1] Move throttle control to FAST. (Swivel should be against
throttle stop.)
[2] If not, loosen casing clamp screw. Move casing and wire
until swivel is against throttle stop, see direction shown by
arrow.
[3] Tighten casing clamp screw.
[1] Move choke control to CHOKE position. (Carburetor
choke should be completely closed.)
[2] If not, loosen casing clamp screw.
[3] Then move casing, wire and engine choke lever in
direction shown until choke is completely closed.
[4] Tighten casing clamp screw.
Choke control adjustment
ALTERNATE REMOTE THROTTLE
WIRE AND CASING
ALTERNATE REMOTE THROTTLE
CASING CLAMP SCREW
REMOTE CONTROL ADJUSTMENTS
MODEL 540000
Throttle control adjustment
REMOTE CHOKE CASING
CLAMP SCREW
CHOKE
LEVER
THROTTLE
SWIVEL
THROTTLE WIRE AND CASING
THROTTLE
CASING CLAMP
SCREW
THROTTLE STOP
[1] Move throttle control to FAST. (Swivel should be against
throttle stop.)
[2] If not, loosen casing clamp screw. Move casing and wire
until swivel is against throttle stop, see direction shown by
arrow.
[3] Tighten casing clamp screw.
[1] Move choke control to CHOKE position. (Carburetor
choke should be completely closed.)
[2] If not, loosen casing clamp screw.
[3] Then move casing, wire and engine choke lever in
direction shown until choke is completely closed.
[4] Tighten casing clamp screw.
Choke control adjustment
ALTERNATE REMOTE THROTTLE
WIRE AND CASING
ALTERNATE REMOTE
THROTTLE CASING
CLAMP SCREW
THROTTLE LEVER
VARIABLE FRICTION
SETTING NUT