Elkhart Brass FLX-20G - Manual (Page 7)

7
B. Maintenance After Use
The nozzle should be flushed thoroughly after every use. This can be done by flowing a clean
water source through the nozzle. The internal passageway of the nozzle should also be
visually inspected for possible damage caused by foreign objects carried by the water through
the nozzle.
C. Storage
The Flex Attack
®
nozzle should always be stored with ball shutoff in the open position and with
the discharge selector in the Dry CAF setting. This will ensure that no water is trapped in the
nozzle during storage.
Important:
If there is a question regarding any necessary repair or damage issue, contact Elkhart Brass for
assistance.
Phone #: 800-346-0250
Email: [email protected]