Elkhart Brass 8287 Three-Inlet Portable Monitor User Manual
Page 5
5
b. Minor changes (20
⁰ max. either direction) in horizontal stream position can be made with water flowing by
rotating monitor turret.
II MAINTENANCE
1. The ground spikes are essential to safe operation in the portable mode. They are made of hardened tool steel
and should remain sharp through prolonged usage. Periodic inspection of these spikes is recommended to
insure that the spikes do not become excessively dull. Spikes can be sharpened using a file or bench grinder,
but the original point angle should be maintained.
2. Check elevation stop mechanism to be sure that stream cannot be lowered below 25
⁰ without releasing lock.
3. Check that horizontal lock mechanism functions effectively.
4. Apply grease annually to monitor vertical swivel joints using grease fittings provided. Use lithium base multi-
purpose grease.
5. a. When monitor is carried, in truck mounting fixture, frequently check that locking clamps are tight. Always
tighten clamping devices prior to placing monitor in operation in truck fixture.
b. If nozzle and discharge tube are stored on monitor mounted in truck fixture, it is recommended that a
support be provided for nozzle and tube in order to prevent premature gear wear on the monitor caused by
road shock.
If repairs or repair parts become necessary, contact the Elkhart Brass Customer Service Department at 574-295-8330 or