Elkhart Brass Scorpion 8394-04 - Manual (Page 13)

10
Figure 11
Panel Cutout and Mounting Hole Pattern for
81412001 and 81339001 Panel Mount Switch Module
4. 81340001 Secondary Switch Box
¾ Mark mounting holes on panel or bracket per dimensions in Figure 12.
¾ Drill two 9/32" diameter holes in panel or bracket.
¾ Remove 1/4-20 screws and lock washers from back of box. Insert screws with lock
washers through backside of panel or bracket into mounting holes in box. Tighten
screws.
Figure 12
81340001 Secondary Control Switch Box Mounting Bolt Pattern