Elkhart Brass Stinger 2.0 8297 - Manual (Page 7)

7
G. 8298EX 2.0
The Pipe ® is an optional extension tube designed to allow the
Stinger monitor to be quickly and easily installed in a higher
position during deck gun deployment in order to clear apparatus
obstructions such as flood lights, hose bed, hose reels or a raised
roof cab. The 8298EX 2.0 utilizes the same patented break-apart
swivel joint used in the Stinger 2.0
® monitor. The 8298EX 2.0 can
only be used in conjunction with the 8298 2.0 deck mount adapter.
The 8298 2.0 adapter must be attached to supply piping that has
been reinforced to withstand the nozzle reaction forces generated by
the Stinger 2.0
® . (Not intended for use with the portable bases.)
Fig. 8
8298EX2.0
H. 8298EX-MB Mounting Bracket
The 8298EX-MB mounting bracket allows convenient and secure
storage of the 8298EX 2.0.
Fig. 9
8298 Mounting Bracket
I. 81460001 Anchor Kit
The anchor kit is used to safely secure the monitor in place with a
steel stake. The Stinger 2.0
® should always be anchored with the
attached safety strap when it is in the portable mode. The kit also
includes a Nupla
® 4lb. hammer with safety grip fiberglass handle,
and a nylon carrying bag.
Fig. 10
81460001 Anchor Kit
F. 8299 2.0 Deck Mount Adapter
The 8299 2.0 is a top mount adapter designed to be supplied with
one or two short lengths of 2.5” or 3.0” hose from the discharge
outlets. The clappered inlet consists of two 2.5” NHT swivels;
special threads are available upon request. The 8299 2.0 assembly
contains the adapter and hardware needed to mount it to the top of
the apparatus.
Fig. 7
8299 2.0 Deck Mount Adapter