Elkhart Brass Stinger 2.0 8397 - Manual (Page 11)

11
3. As Needed:
To replace the left-right lock plug remove the retaining ring from the pivot pin on the torsion
spring end. Remove the pivot pin from the opposite side while holding the lock lever and
torsion spring with your free hand. Remove the old lock plug and insert a new one. Clean the
lock residue from the knurling surfaces. Reverse the steps to reassemble the lock.
4. As Needed:
Replace the labels if they become illegible, lost, painted over, or removed.
5. As Needed:
Replace any damaged parts including illegible labels. Part numbers can be found in the
exploded parts drawings at the end of this manual. Parts can be ordered from any Elkhart Brass
distributor, or directly from Elkhart Brass Mfg. Co. Inc. Please call 1-800-346-0250 with any
questions about this or any other Elkhart Brass product.