Balance KH 8097 - Manual (Page 13)

13
The measurement process starts with the pumping up
of the sleeve.
´ To break off the measurement process press the
button again.
During measurement, air is gradually released from the
sleeve. If the measurement fails at this point, the appli-
ance may pump some more air into the sleeve. If a
measurement is taken successfully, the remaining air is
released and the display shows ...
· the „systolic“ blood pressure at the top, in healthy
adults it lies between about 105-140 mmHg,
» the “diastolic” blood pressure in the middle, in
healthy adults it lies between about 60-90 mmHg,
¿ the pulse measurement at the bottom.
The m easured blood pressure as well as the program-
med limit values are displayed alternatively. Should a
limit value be exceeded (SYS or DIA) the appropriate
value flashes in the display. Press the button
to change over to the Start display and
possibly alter the programmed values.
The appliance is equipped with an automatic switch-off.
Should a button not be activated within one minute,
the appliance switches itself off. Press the button
, to switch the appliance back on. START / STOP
START / STOP
START / STOP