Elkhart Brass X-Stream SM500E – SM2000E - Manual (Page 2)

2
PRODUCT SAFETY
Important: Before installing and operating this equipment, read & study this manual thoroughly.
Proper installation is essential to safe operation. In addition, the following points should be adhered
to in order to ensure the safety of equipment and personnel:
 All personnel who may be expected to operate this equipment must be thoroughly trained in its safe and
proper use.
 Before flowing water from this device, check that all personnel (fire service and civilian) are clear of the
stream path. Also confirm stream direction will not cause avoidable property damage.
 Become thoroughly familiar with the hydraulic characteristics of this equipment, and the pumping
system used to supply it. To produce effective fire streams, operating personnel must be properly
trained.
 Always open and close valves supplying this equipment slowly, so that the piping fills with water
slowly, thus preventing the possible occurrence of water hammer.
 After each use, and on a scheduled basis, inspect equipment per instructions in the maintenance section.
 Keep fingers and hands clear of moving parts
 Disconnect power prior to servicing controls.
 Any modifications to the electrical enclosure will destroy the NEMA 4 rating and void warranty
coverage of the enclosure and all components within.
 All equipment must be installed in accordance with local codes (NFPA 70 or EN/IEC 60079-14) as
appropriate and in areas where equipment classification is suitable.
WARNING: Do not attempt to disconnect or work on any electrical equipment in this system
unless power is removed or the area is known to be non-hazardous.
NOZZLE INFORMATION:
DETAILS:
__________________________________________________________________________________________
__________________________________________________________________________________________
__________________________________________________________________________________________