Bunn AXIOM-1L/2U - Manual (Page 2)

BUNN ® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such
revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
All dimensions shown in centimeters.
Bunn-O-Matic Corporation owns all copyrights relating to materials in this publication. Please contact BUNN to request permission to reproduce any portion of this publication.
Dimensions & Specifications
Bunn-O-Matic ® Corporation - 1400 Stevenson Drive Springfield, Illinois 62703 • USA • +1-217-529-6601 • Fax +1-217-529-2827 • www.bunn.com
Model Product # Volts Amps Tank Heater Total Brewing Shipping Cord* Agency
Watts Watts Capacity Weight Attached
AXIOM-1L/2U 38700.0004 230 9 1700 2100 18.8 L/hr. 13.6 kg Yes
1 lower/2 upper
AXIOM-3L 38700.0005 230 9 1700 2100 18.8 L/hr. 14.1 kg Yes
3 lower warmers
AXIOM-1L/2U 38700.0006 200 19 3500 3800 28.4 L/hr. 13.6 kg Yes
1 lower/2 upper
AXIOM-3L 38700.0007 200 19 3500 3800 28.4 L/hr. 14.1 kg Yes
3 lower warmers
Brewing capacity: based upon incoming water temp of 60ºF/15.6˚C (140ºF/60˚C rise) per 1.9 litre brew time of 4 minutes.
Electrical: 230 volt models require 2-wires plus ground service rated 220-240V, single phase, 50/60Hz.
200 volt models require 2-wires plus ground service, single phase, 50/60 Hz.
An internal terminal block is configured for connection to a 3-wire plus ground.
*Open ended cord - no electrical plug attached.
Plumbing: 20-90 psi (138-621 kPa). Machines supplied with
1 ⁄
4
" male flare fitting.
AXIOM-1L/2U
AXIOM-3L