Elkhart Brass ELKHART 43-L & 43-R Hose Clamps User Manual
Page 2
Advertising
Operation
Step 1. Open the valve slowly to fill the section of the hose up to the clamp assembly.
Step 2. Grab the nozzle and pull the entire length of hose from the reel or cabinet.
Step 3. Once all the hose is out give the hose a forceful tug to release the clamp. This
will release the water to fill the remainder of the hose up to the nozzle. Be prepared to
brace against the reaction force of the nozzle once the water reaches it.
Advertising