Chapter 1: introduction, Cable kit, Recommended tool – ElmoMC Gold Line Digital Servo Drives-Gold Solo Guitar Cable Kit User Manual
Page 4: Chapter 1, Introduction, Cable kit 1.2. recommended tool
Gold Solo Guitar Cable Kit
MAN-G-SOLOGUT-CBLKIT (Ver. 1.101)
4
Chapter 1:
Introduction
This document provides the wiring details for the cables used to connect Elmo's Gold Solo
Guitar servo drive with the end-user application. The servo drive-side pinouts are provided in
the Gold Solo Guitar Digital Servo Drive Installation Guide.
The cables come in one length: 2 meters (6 ½ feet).
1.1. Cable Kit
The catalog number of the Gold Solo Guitar cable kit is CBL-GSOLGUIKIT01.
NOTE:
It should be noted that this kit does not include any communication cables. Please purchase
these cables separately.
This cable kit includes the following cables:
ELMO Part Number
Function
CBL-GPORTA-B2
Feedback port A
CBL-GPORTB-B2
Feedback port B
CBL-GPORTCIO-B2
Port C and I/O
CBL-GSTOCOM-B2
STO
1.2. Recommended Tool
If you are creating your own cables, it is recommended that you use a Molex hand crimp tool
No. 63819-0200 (shown below) to attach the female terminals to the wires.