ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 12)

Whistle, Bell Guitar Evaluation Board User Guide Combined Evaluation Board
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
12
.8 Whistle
This section explains how to connect the Whistle to the Evaluation Board, and provides
details about all the connectors.
.8.1 Connecting the Whistle to the Evaluation
Board
Each Whistle has 51 pins; therefore, great care should be taken aligning its pins with the
sockets on the board when assembling. Push the Whistle into the Evaluation Board firmly and
evenly.
Figure 1: Assembling the Whistle on the Evaluation Board
H1
H2
H3
M 2½ x 5 mm
Spring
washers
3 spacers
recommended M
2½ x 21 mm