ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 35)

Whistle, Bell Guitar Evaluation Board User Guide Combined Evaluation Board
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
35
.10.4 Guitar Connections on the Evaluation Board
The Guitar is connected to the Evaluation Board by 2mm pitch header connectors. Upon
assembly, Guitar’s J2, J10 and Power pins should be pressed directly into their respective
sockets. Great care should be taken with alignment to avoid bending the pins.
Note: All the connectors below are internal connectors.
J10
J2
PE
M1
M2
M3
VPG
VLG
PR
Internal
connectors
Internal
connectors