ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 63)

Whistle, Bell Guitar Evaluation Board User Guide Combined Evaluation Board
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
63
.14.4 I/O Cables
The Evaluation Board has I/O ports, P1 and J2. J1 is a general I/O which can be used to
connect 6 digital inputs and 5 digital outputs. J2 is an input port for connecting up to 4
separate digital inputs and 2 analog inputs:
I/O WHI GUI BELL
Digital Input 6 6 differential 6
Digital Output 2 4 2
Analog Input 1 1 1
.15 General I/O Port
The Evaluation Board has 6 digital inputs, 2 digital outputs and a single analog input.
The General I/O port has a 26-pin high density D-Sub plug with the following pin-outs.
Pin Signal Function
1 INRET1 General input return 1
2 INRET2 General input return 2
3 INRET3 General input return 3
4 INRET4 General input return 4
5 INRET5 General input return 5
6 INRET6 General input return 6
7 +5V_EXT Non-isolated +5V supply voltage
8 SUPRET Supply return
9 AN1+ Analog input 1 (positive)
10 IN1 General input 1
11 IN2 General input 2