ElmoMC SimplIQ Digital Servo Drives-Guitar Evaluation Board User Guide - Manual (Page 88)

Whistle, Bell Guitar Evaluation Board User Guide Cables
MAN-EVLBRD-WHI-BEL-GUI (Ver. 1.401)
88
.29.3 General I/O (CBL-CELIO1-1)
The digital input cable kit is a 24-AWG shielded cable. It has eight pairs of
wires.
Pin No. Signal Function
1 INRET1 General input return 1
2 INRET2 General input return 2
3 INRET3 General input return 3
4 INRET4 General input return 4
5 INRET5 General input return 5
6 INRET6 General input return 6
7 +5V_EXT Non-isolated +5V Supply Voltage
8 SUPRET Supply return
9 AN1+ Analog input 1 (positive)
10 IN1 General input return 1
11 IN2 General input return 2
12 IN3 General input return 3
13 IN4 General input return 4
14 IN5 General input return 5
15 IN6 General input return 6
16 SUPRET Supply return
17 +5V_EXT Non-isolated + 5V Supply Voltage
18 AN1- Analog input 1 (negative)
19 OUTP4 Programmable output 4
20 OUTP3 Programmable output 3
21 OUTP2 Programmable output 2
22 OUTP1 Programmable output 1
23 -VDO Input of an external +24 V RETURN
24 -VDO Input of an external +24 V RETURN
25 VDO Input of an external +24 V, for supplying the LED drivers and Brake.
Isolation is optional – it depends on the user’s application requirements.
26 VDO Input of an external +24 V, for supplying the LED drivers and Brake.
Isolation is optional – it depends on the user’s application requirements.