Bushnell BACKTRACK 360200 - Manual (Page 4)

4
3. The Location screen will display when first turned on. The time is displayed but may need to be adjusted for your time
zone. Go to Settings Mode to change the time (as well as other units of measurement). Press Up button on right side
of unit to access Settings Mode.
4. Press the MaRK button to go to the Time Set screen. Press the Up or dOWN button to set the correct hour. The
minutes are automatically set via GPS satellite data. After you’ve set the hour, press MaRK to confirm the setting.
Settings Mode
press Up
press MaRK
Time Set Screen
dOWN Up
press the Up/dOWN
buttons to set the hour,
then press MaRK to
confirm and return to
Settings Mode
Icons indicate button functions
in Setup mode
Time Set
Temp Units
Hour Format
distance Units