BBE DS26 - Manual (Page 25)

19
GRAPHICAL USER INTERFACE (GUI)
2.Click NEW. A dialog box labeled “Unit” will appear in the screen.
3.Device ID assigns a number between 1 and 64 to the unit.
4.Select Unit Type selects whether the unit is a DS24 or a DS26.
5.Format selects the main crossover mode for the unit. There are four types available for
the DS24 and six types available for the DS26.
The next frame assigns certain input and output options and is device and mode
dependent:
8.4.1 Crossover Types DS24
2x2 Way crossover
Output 3/4; Choice of Input B or Mono Sum
3 Way crossover plus 1 Aux
Output 4; Choice of Input B or Mono Sum
4 Way crossover
Input Source; Choice of Input A or Mono Sum
2 Way mono sub crossover
No Option
8.4.2 Crossover Types DS26
2x2 Way crossover
No Option
2x3 Way crossover
No Option
4 Way crossover plus 2 aux
Output 5/6; Choice of Input B or Mono Sum
5 Way crossover plus 1 aux
Output 5/6; Choice of Input B or Mono Sum
6 Way crossover
No Option
Stereo Links is an option for the 2x2 and 2x3 crossover modes only.
Click OK to exit this screen.