Equity by La Crosse 24014 Analog Wind-Up Loud Bell Alarm Clock User Manual

Equity by La Crosse Clock

Advertising
background image

MODEL 24012

OPERATING MANUAL

To Set the Time: Turn the time set knob to the correct time. Wind the time key fully in the direction the

arrow indicates.

To Set the Alarm:

1. Turn the Alarm set button in the direction the knob indicates to the desired alarm time.

2. Wind the alarm winding key fully in the direction the arrow indicates.

To turn Alarm on: The Alarm is AUTOMATICALLY activated once the alarm key is wound. The alarm pin

will automatically be pushed out.

To turn Alarm off: Push the alarm on/off pin in.

NOTE: the movement of the alarm on/off pin is very slight

To Adjust the Time Accuracy: The clock has been regulated at the factory. However, the regulator may

have shifted during shipping.

1. If clock is running fast-move regulator towards (-) sign

2. If clock is running slow-move regulator towards (+) sign

Two Year Warranty (U.S.A.)

Equity products are warranted for two years from the date of consumer purchase against defects in material and

workmanship. During this period such defects will be repaired, or the product will be replaced at Equity’s

option. This warranty does not cover damage caused by misuse or negligence. ALL IMPLIED WARRANTIES,

INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN

DURATION TO A PERIOD ENDING TWO YEARS FROM DATE OF PURCHASE. Some states do not allow limitations on

how long an implied warranty lasts so the above limitation may not apply to you. This warranty gives you specific

legal rights and you may also have other rights which vary from State to State.

Please help in preservation of the environment and return used batteries to an authorized depot. Remove the battery
from the clock if you do not intend to use for an extended period of time

.

Advertising