Equity by La Crosse 12020 Analog Wind-Up Bell Alarm Clock - Manual

jg�.
KEYWOUND ALARM CLOCK
OPERATING INSTRUCTIONS MODEl# 12020
Alarm on/off
pin
0
Alarm.et
knob
o
Tim.
wind key
Time set knob
To Set Time:
Turn the time set knob to the correct time. Wind the time key fully in the
direction the arrow indicates.
To Set Alarm:
Turn the Alarm set button in the direction the knob indicates to the desired alarm time.
Wind the alarm winding key fully in the direction the arrow indicates.
To tnrn Alarm on:
The Alarm is AUTOMATICALLY activated once the alarm key is wound.
The Alarm pin will automatically be pushed out.
To turn Alarm off:
push the alarm onloff pin in.
NOTE: the movement of the alarm onloffpin is very slight.
To Adjust the Time Accuracy:
The clock has been regulated at the factory. However, the
regulafor may have shifted during shipping.
a) If clock is running fast-move regulator towards the (
-
) sign.
b) If clock is running slow-move regulator towards the (+) sign.
TWO YEAR WARRANTY (U.S.A.)
Equity products are warranted for two years from the date of consumer purchase
against defects in material and workmanship. During this period such defects will be
repaired, or the product will be replaced at Equity' s option, without charge. This
warranty does not cover damage caused by misuse or negligence.
ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OR FITNESS AND MERCHANTABILITY, ARE LIMITED IN
DURATIONTO THE PERIOD ENDING ONE YEAR FROM THE DATE OF PURCHASE.
Some states do not allow limitations on how long an implied warranty willlastso the
above limitation may not apply to you. This warranty gives you specific legal rights
and you may have other rights which vary from state to state.
If your clock isn't working, send it with a letter explaining the problem and
$5.00
for
postage and handling to:
Equity Warranty Dept.
2817 Losey Blvd. So.
La Crosse WI
5460
I
Made in China Printed in China