Brother 565 - Manual (Page 75)

7 - 3 QUICK-DIAL NUMBERS AND DIALING OPTIONS
Changing One-Touch and Speed-Dial numbers
If you try to store a One-Touch or Speed-Dial number where a number is already
stored, the LCD will show the name stored there (or number) and will ask you to do
one of the following:
1
Press 1 to change the stored number.
—OR—
Press 2 to exit without making a change.
2
Enter a new number.
Press Menu/Set .
■
If you want to erase the whole number or whole name, press Stop/Exit
when the cursor is under the first digit or letter. The characters above and
to the right of the cursor will be deleted.
■
If you want to change a character, use or to position the cursor
under the character you want to change, and then type over it.
3
Follow the directions beginning at Step 3 in Storing One-Touch Number or
Storing Speed-Dial numbers.