ERICO CADDY MPVTI Low Voltage Mounting Clip - Manual (Page 2)

Technical Support:
800-25-CADDY
(1-800-252-2339)
www.erico.com
MPVTI
F1192PK05
WARNING
1. ERICO ® products shall be installed and
used only as indicated in ERICO product
instruction sheets and training materials.
Instruction sheets are available at
www.erico.com and from your ERICO
customer service representative.
2. ERICO products must never be used for a
purpose other than the purpose for which
they were designed or in a manner that
exceeds specified load ratings.
3. All instructions must be completely
followed to ensure proper and safe
installation and performance.
4. Improper installation, misuse,
misapplication or other failure to
completely follow ERICO’s instructions
and warnings may cause product
malfunction, property damage, serious
bodily injury and death.
5. Products that are manufactured using
spring steel components shall be used
only in a non-corrosive indoor
environment.
6. All pipe supports, hangers, intermediate
components and structural attachments must
ONLY be used as described herein and are
NEVER to be used for any other purpose.
NOTE: All load ratings are for static conditions
and do not account for dynamic loading such as
wind, water or seismic loads, unless
otherwise noted.
The customer is responsible for:
a. Conformance to all governing codes.
b. The integrity of structures to which the
products are attached, including their
capability of safely accepting the loads
imposed, as evaluated by a qualified
engineer.
c. Using appropriate industry standard hardware
as noted above.
SAFETY INSTRUCTIONS: All governing codes and
regulations and those required by the job site
must be observed. Always use appropriate safety
equipment such as eye protection, hard hat, and
gloves as appropriate to the application.
CFS347D
F1192PK05 12/16/05 3:14 PM Page 2