Deck – Bakers Pride P-22S User Manual
Page 7
Stainless steel surfaces should be cleaned with BAKERS PRIDE STAINLESS STEEL
CLEANER.
!
SERVICE AND TROUBLE SHOOTING
The ovens are designed to be as trouble free as possible. Keeping the oven clean is all that is
normally required. All servicing should be performed by a factory authorized technician only.
However, if your oven stops operating, please check the following:
!
Power supply cord is plugged into the supply receptacle.
!
Power supply fuse/circuit breaker has not tripped.
If the oven still does not operate, take the following steps:
!
Disconnect the power supply to the unit by removing the supply cord and/or turning off the
main switch.
b.
Contact the factory, factory representative or an authorized service agency.
Note: Infinite control switches must be in a set position (other than off) in model DP-2 with
optional infinite switches, for elements to operate.
A system wiring diagram is a part of this manual and is provided on the back of the unit.
For further information and to purchase the deck scraper/brush, or stainless steel cleaner, call
BAKERS PRIDE at: (914) 576-0200.
6.
INSTALLATION OF DECKS
DECK
DECK
7