Eschenbach Optik Opti Lite - Manual (Page 11)

OPTi Lite User Manual
Page 10
Rev B English
If you make a change to a view you can
store it as one of the ten views (View 0 to
View 9) as follows:
Ctrl + Shift + 0 to save as view 0
Ctrl + Shift + 1 to save as view 1
and so on up to
Ctrl + Shift + 9 to save as view 9
You will be prompted to confirm that you
wish to save the current layout.
Note that you cannot store a
setting at full screen. You should
instead use Page Up to enlarge the
window to the maximum size and then
save this instead.
To recall the stored views, press Ctrl + 0
to Ctrl + 9. You will be prompted to save
any changes you made to the current view
when you change to another view.