Eschenbach Optik Quicklook Touch - Manual (Page 12)

12
button. To turn the lights back on, simply
turn the Quicklook off and back on again.
Manual Focussing
It is possible to manually change the focus
on the Quicklook Touch: simply power-on
the unit while holding the Focus button
and release when the image is displayed.
In use, repeated pressing of the Focus
button will step through various focus
settings and an icon on the display will
indicate the focus level chosen.
To disable manual focus mode the unit
must be powered-on with the Focus button
pressed.
Battery Level
At start-up, the battery level is displayed
in the corner of the screen for 10 seconds.
You can choose to display it constantly
from the Advanced Menu (see below). The
battery icon changes colour depending on
the remaining capacity and will display in
blue if the unit is being recharged. When
the battery has only a few minutes power