Eschenbach Optik Quicklook Focus - Manual (Page 16)

16
The Info screen will display the
revision of the software within
the unit.
Factory Defaults – will return
the unit to its original factory
settings.
Reset
If Quicklook stops responding to button
presses it may need to be reset. Using a
pen or similar instrument, press the reset
button recessed into the underside of the
unit near the camera.
Fitting the wrist strap
Quicklook Focus is supplied with an
optional wrist strap. To fit this, pass the
thin loop of the strap through the hoop on
the top of the unit. Pass the entire strap
through the thin loop and pull tight.