ETC Congo Kid Setup Guide User Manual

Setup guide

Advertising
background image

Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736

London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000

Rome, IT Via Pieve Torina, 48, 001569 Rome, Italy Tel +39 (06) 32 111 683 Fax +44 (0) 20 8752 8486

Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00

Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325

Service: (Americas)

[email protected]

(UK)

[email protected]

(DE)

[email protected]

(Asia)

[email protected]

Web:

www.etcconnect.com

Copyright © 2011 ETC. All Rights Reserved. Product information and specifications subject to change.

ETC intends this document to be provided in its entirety.

Page 1

4340M2200

RevB

2014-04

Setup Guide

Make sure to keep the fan and vents clear of any obstructions.

USB ports are used to

connect a keyboard,

mouse, and/or USB

flash drives. One addi-

tional port is located on

Congo Kid’s face panel.

The phone remote jack is for

plugging in a cordless phone

for remote control of Congo

Kid. Please see the Cobalt

Family User Manual for more

information.

5 pin XLR DMX Cables plug into the

DMX ports to connect Congo Kid with

dimmers, scrollers, moving lights, and

other devices.

For information about MIDI and Remote Trigger,

please see the current Cobalt Family User Manual.

Cat 5 Ethernet Cable

plugs into the Ethernet

port for connecting

Congo Kid to a lighting

network or RFR.

IEC Power Cable

(1 ships with Congo

Kid) plugs into the

IEC Receptacle.

Hard Power Switch

(I is on, O if off)

Soft Power / Reset

Switch

DVI-I Port

Audio Out

(Audio In

Reserved

for Future

Implementation)

2 USB Ports

Remote Trigger

Phone Remote

DVI-D Port

Ethernet

1 & 2

2 USB Ports

2 DMX Ports

2 MIDI Ports

(One In and

One Out)

IEC Receptacle

Fan

Vents

Display

Port

2 USB Ports

eSATA

Port

®

Display Port

Display Port

DVI-I Port

DVI-D Port

DVI

VGA

Yes

No

Yes

with Adapter

Yes

Yes

No

No

Yes

with Adapter

Yes

with Active

Adapter

Congo Kid supports up to 2 monitors using the following

combinations:

Multitouch monitors need to be Windows 7 or 8 Compatible.

Physical

Port

Signal

Type

Advertising