ETC Net3 Remote Video Interface (RVI) Setup Guide - Manual

E T C
®
S e t u p G u i d e
Net3 Remote Video Interface
Net3 Remote Video Interface Setup Guide Page 1 of 4 Electronic Theatre Controls, Inc.
Corporate Headquarters  3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA  Tel +608 831 4116  Fax +608 836 1736
London, UK  Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK  Tel +44 (0)20 8896 1000  Fax +44 (0)20 8896 2000
Rome, IT  Via Pieve Torina, 48, 00156 Rome, Italy  Tel +39 (06) 32 111 683  Fax +44 (0) 20 8752 8486
Holzkirchen, DE

Ohmstrasse 3, 83607 Holzkirchen, Germany

Tel +49 (80 24) 47 00-0

Fax +49 (80 24) 47 00-3 00
Hong Kong  Rm 1801, 18/F, Tower I Phase 1 Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong  Tel +852 2799 1220  Fax +852 2799 9325
Service: (Americas) [email protected]

(UK) [email protected]

(DE) [email protected]

(Asia) [email protected]
Web: www.etcconnect.com  QSF 4.1.9.1  Copyright © 2014 ETC. All Rights Reserved.  Product information and specifications subject to change.
4250M2210  Rev C  Released 2014-06  ETC intends this document to be provided in its entirety.
This guide outlines the setup and configuration of your Net3™ Remote Video Interface (RVI). The RVI
functions as a remote user interface to access and modify the contents of an entire Eos
®
Family or
Cobalt ® Family show file. You may configure the RVI to run either the Eos or Cobalt software in “Client”
or “Offline” mode. When configured with Eos software, the RVI can also run in mirror mode.
This guide outlines the setup and simple configuration of your Remote Video Interface (RVI) for use
with the Eos Family and Cobalt Family controls systems. For information on using the Eos or Cobalt
client software installed on your RVI, please refer to the associated console operations manual that
shipped with your console, or you may download it from our website at
www.etcconnect.com .
Net3 RVI ships with the following:
• Remote Video Interface
• USB Keyboard
• USB Mouse
• Rack Mount Hardware Kit
• IEC Power cords with varying connectors
• Label Sets
• This Setup Guide
• Current Release Note Documentation for Eos Family and Cobalt Family consoles
Setup
Connect Cables
Step 1: Attach the appropriate IEC power cord to the power connector, then to the IEC receptacle.
NET3 RVI
AC Input
100-240VAC
50/60Hz 2A
Electronic Theatre Controls, Inc.
Middleton, WI Made in USA C US
w w w .et cc onnec
t.c om
Displa
yP or t ETHERNE
T
e-SA
TA
ETHERNE
T
SS MIC
OUT
IN
/DVI-D
/DVI-I
100-240VAC
50/60 Hz
2A@120VAC
Hard Power Switch
Audio Ports
(Not Currently Enabled)
IEC Receptacle
Ethernet Ports 1 & 2
DVI-I
Port
DVI-D
Port
Display
Port
eSATA
Port
USB
Ports
USB
Ports
USB
Ports