For ho – BenQ Digital Projector MS612ST User Manual
Page 48
Operation
48
Function
Description
3D Sync
(continued)
When the 3D Sync function is On:
• The brightness level of the projected image will decrease.
• The Picture Mode cannot be adjusted.
• The Keystone can only be adjusted within limited degrees.
3D Sync
Invert
When you discover the inversion of the image depth, enable this
function to correct the problem.
Teaching
Template
Provides several preset patterns for various teaching purposes.
Choose Blackboard or Whiteboard first by pressing /
and press
/
to choose the pattern you need. Press MODE/ENTER to activate
the pattern.
Picture Mode
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
for details.
Reference
Mode
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
"Setting the User 1/User 2 mode" on page 27
details.
Brightness
Adjusts the brightness of the image. See
"Adjusting Brightness" on page
for details.
Contrast
Adjusts the degree of difference between dark and light in the image.
See
"Adjusting Contrast" on page 28
for details.
Color
Adjusts the color saturation level -- the amount of each color in a video
image. See
for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Tint
Adjusts the red and green color tones of the image. See
for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Sharpness
Adjusts the image to make it look sharper or softer. See
for details.
This function is only available when a Video, S-Video or
Component Video signal is selected.
Brilliant Color
See
"Adjusting Brilliant Color" on page 28
for details.
Color
Temperature
There are four color temperature settings available. See
for details.
3D Color
Management
See
"3D Color Management" on page 29
for details.
Save Settings
Saves the settings made for User 1 or User 2 mode.
1. D
ISPLAY
menu
2. PICTUR
E
menu