ETC Source Four PAR XWFL Lens Kit Assembly Guide User Manual
E t c, Par xwfl lens kit, Overview
E T C
®
A s s e m b l y G u i d e
PAR XWFL Lens Kit
.
c
n
I
,
sl
o
rt
n
o
C
e
rt
a
e
h
T
ci
n
o
rt
c
el
E
1
f
o
1
e
g
a
P
e
di
u
G
y
lb
m
e
s
s
A
t
i
K
s
n
e
L
L
F
W
X
R
A
P
Corporate Headquarters 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA Tel +608 831 4116 Fax +608 836 1736
London, UK Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK Tel +44 (0)20 8896 1000 Fax +44 (0)20 8896 2000
Rome, IT Via Ennio Quirino Visconti, 11, 00193 Rome, Italy Tel +39 (06) 32 111 683 Fax +39 (06) 32 656 990
Holzkirchen, DE Ohmstrasse 3, 83607 Holzkirchen, Germany Tel +49 (80 24) 47 00-0 Fax +49 (80 24) 47 00-3 00
Hong Kong Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong Tel +852 2799 1220 Fax +852 2799 9325
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
www.etcconnect.com
Copyright © 2007 ETC. All Rights Reserved. Product information and specifications subject to change.
7061M1017 Rev C Released 10/2007
ETC intends this document to be provided in its entirety.
Overview
When the XWFL lens (PN 7061A1042) is used in a
Source Four PAR, the lens must be equipped with
four Tinnerman clips (PN HW8203), which are installed
at the factory. The clips do not interfere with the
light beam.
If the clips are removed, follow the i llustration below to reinstall them.
.
WARNING
The XWFL lens is approximately 3.2mm (1/8 inch) smaller in diameter than the
NSP-WFL lenses shipped with the EA and MCM PARs. The clips provided with
the XWFL lens must be used to secure it safely in the lens ring.
Failure to observe this warning could result in serious injury.
N o t e :
The clips must be installed 90° apart and so that every other one is facing the back
of the lens.
2
1
1.6mm
(1/16")
Facing
back
Facing
back
Facing
front
Facing
front