Soft focus diffuser, Address, Features – ETC Source Four LED v1.6.0 Quick Guide User Manual
Page 4
E T C S o u r c e F o u r L E D Q u i c k G u i d e
Soft Focus Diffuser
Source Four LED Profile
Page 4 of 8
Electronic Theatre Controls, Inc.
Soft Focus Diffuser
Step 1:
Install the diffuser into an A-Sized Pattern holder.
Step 2:
Install a pattern in front of the diffuser, if needed.
Step 3:
Insert the pattern holder with diffuser into the Pattern holder slot, making sure the
writing on the diffuser faces the front of the fixture.
Address
Step 1:
From the home screen, press [
] to open the Main Menu.
Step 2:
In the Main Menu, scroll to DMX Start Address, press [
].
Step 3:
Use [
] or [
] to scroll to the desired fixture address.
Step 4:
Press [
] to select the address number.
Step 5:
Press [
] to return to the home screen.
* DMX address is not needed if using standalone or master/slave control.
Features
Quick Color (Lustr+, Series 2 Lustr, and Studio HD only)
Quick Color allows you to easily select a color and its intensity from a predefined menu. This
feature overrides any presets or sequences previously selected and is only available when
there is no external DMX signal to the fixture.
To select a Quick Color:
Step 1:
Within the Presets and Sequences screen, scroll to Quick Color and press [
].
Step 2:
Scroll to Color and press [
].
Step 3:
Scroll to the desired color and press [
].
Step 4:
Scroll to Intensity and press [
].
Step 5:
Scroll to adjust the fixture’s intensity and press [
] to commit the selection.
Step 6:
To exit the Quick Color menu, press [
].
N o t e :
Exiting the Quick Color menu will return the fixture to the state it was in prior to
entering the menu.