ETC Unison Paradigm Touchscreen with Locking Cover - Manual

E T C
®
I n s t a l l a t i o n G u i d e
Unison Paradigm Touchscreen with Locking Cover
Unison Paradigm Touchscreen with Locking Cover Page 1 of 4 Electronic Theatre Controls, Inc.
Corporate Headquarters „ 3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA „ Tel +608 831 4116 „ Fax +608 836 1736
London, UK „ Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK „ Tel +44 (0)20 8896 1000 „ Fax +44 (0)20 8896 2000
Rome, IT „ Via Ennio Quirino Visconti, 11, 00193 Rome, Italy „ Tel +39 (06) 32 111 683 „ Fax +44 (0)20 8896 2000
Holzkirchen, DE
„
Ohmstrasse 3, 83607 Holzkirchen, Germany
„
Tel +49 (80 24) 47 00-0
„
Fax +49 (80 24) 47 00-3 00
Hong Kong „ Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong „ Tel +852 2799 1220 „ Fax +852 2799 9325
Service: (Americas) [email protected]
„
(UK) [email protected]
„
(DE) [email protected]
„
(Asia) [email protected]
Web: www.etcconnect.com „ Copyright © 2008 ETC. All Rights Reserved. „ Product information and specifications subject to change.
7184M2110 „ Rev A „ Released 11/2008
Overview
The Unison ® Paradigm™ Touchscreen with locking cover uses a high-resolution, 7”-wide screen, color
liquid-crystal display (LCD) that is bright and easy to read, with controllable back lights. The
Touchscreen is installed in a flush mount backbox or a surface backbox or which is shipped separately.
The locking cover prevents tampering or damage to the Touchscreen. The Touchscreen is also
available in rack mount and wall mount configurations. The Touchscreen is powered by either
LinkPower and Auxiliary power or PoE (Power Over Ethernet 802.3af).
• Echelon
®
LinkPower
®
(LinkConnect) control network utilizing Belden 8471 (or approved equal)
and 24 Vdc Auxiliary power (two 16 AWG 1.5mm
2
) wires.
• PoE (Power over Ethernet 802.3af) utilizing Category 5 cable (or approved equal).
All control wiring should be installed and terminated by a qualified installer and should follow standard
wiring installation practices. Leave approximately 10 inches (254mm) of wiring in the backbox for
connection and to allow slack for future service needs. For more information about terminating Cat5
cable, refer to the ETC Ethernet Cat5 Termination Kit Setup Guide.
Installing the Backbox and Locking Cover
Installation should follow local codes and standard practices. Ensure that the backbox is clean and free
of obstructions. Ensure that all wiring is installed correctly. The touchscreen is supplied with an
installation kit which includes hardware and electrical supplies for most applications.
Flush Mount Backbox
The hole in the wall should be cut carefully so there are no gaps around the box. The installation kit
includes two lengths of screws for depth adjustment and screws for securing the collar.
Surface Mount Backbox
Do not use the depth adjustment screws in the surface mount backbox. Use the M4 mounting pan head
screws to attach the collar to the surface mount backbox. Refer to the instructions for the flush mount
backbox.
Paradigm Backbox
Model Description
P-LCD-FBB Paradigm Touchscreen flush mount backbox
P-LCD-LSBB Paradigm Touchscreen Locking Cover surface mount backbox
N o t e : A special trim ring is available to cover any excess rough-in gap. Contact ETC or your
ETC Dealer for availability.
M3 depth
adjustment
screw
M4
mounting
screw