ETC DMX-RDM One Port Gateway Setup Guide User Manual
E t c, Overview, Dmx/rdm one port gateway
E T C
®
S e t u p G u i d e
DMX/RDM One Port Gateway
Corporate Headquarters
3031 Pleasant View Road, P.O. Box 620979, Middleton, Wisconsin 53562-0979 USA
Tel +608 831 4116
Fax +608 836 1736
London, UK
Unit 26-28, Victoria Industrial Estate, Victoria Road, London W3 6UU, UK
Tel +44 (0)20 8896 1000
Fax +44 (0)20 8896 2000
Rome, IT
Via Pieve Torina, 48, 00156 Rome, Italy
Tel +39 (06) 32 111 683
Fax +44 (0)20 8752 8486
Holzkirchen, DE
Ohmstrasse 3, 83607 Holzkirchen, Germany
Tel +49 (80 24) 47 00-0
Fax +49 (80 24) 47 00-3 00
Hong Kong
Rm 1801, 18/F, Tower 1 Phase 1, Enterprise Square, 9 Sheung Yuet Road, Kowloon Bay, Kowloon, Hong Kong
Tel +852 2799 1220
Service: (Americas)
(UK)
(DE)
(Asia)
Web:
Copyright © 2014 ETC. All Rights Reserved. Product information and specifications subject to change.
4264M2210 Rev B Released 2014-09 ETC intends this document to be provided in its entirety.
Overview
The DMX/RDM One Port Gateway is a network data distribution device
designed for simple installations with support for Net3 protocols including
sACN as well as DMX and Remote Device Management (RDM). The
instructions outlined in this document apply to both Input and Output versions
of the One-Port gateway.
Three variations of the One-Port DMX Gateway are available; wall mounted
(fitting to a US one gang backbox), DIN-rail mounted, or touring. The One Port
Gateway is powered by 802.3af Power over Ethernet (PoE) or 12-24VDC
power.
Configuration for NET3 DMX/RDM gateways is done using NET3 Concert
Software. The latest version is available from
www.etcconnect.com
and
includes an in-depth help system.
N o t e :
Network wiring should be installed and terminated by a qualified
network installer and follow standard Ethernet wiring practice.
N o t e :
Wall mount and DIN rail version can accept DC power; the DC
power connections are polarity insensitive, i.e. + and - can be
landed on either connection.
wall mount
DIN-rail
mount
touring