Bench KH 994 - Manual (Page 6)

3) To increase the countdown period press the hours button ¸ .
The display ¿ now shows 1:59 – this is the maximum countdown period.
4) To change the minutes setting, press the minutes button µ . As you hold down the minutes button µ ,
the minutes are automatically decreased. Release the minutes button µ when the required
countdown period is shown.
Stopping the timer:
1) When the set countdown period has elapsed, the radio sounds a tone.
2) To switch off the tone or to terminate the countdown timer before the end, slide the timer switch
Ƹ
to OFF. The display ¿ returns to showing the current time.
ALARM
ș You can use the kitchen radio as an alarm clock. You can choose whether to be woken by the radio
or by an alarm tone.
Setting the wake-up time:
Press and hold down the wake-up time button ³ and press the hours button ¸ or the minutes
button µ as required to set the correct wake-up time.
Wake-up with radio:
1) First set the radio to the required station using the STATION selector ² . You can read the frequency
set on the scale » .
2) Use the volume control º to set the volume at which you would later wish to be woken.
3) Slide the On/Off switch ƹ into the AUTO position. A dot ¹ lights up on the display ¿ to indicate
that the alarm is switched on.
4) The radio will now switch on at the set wake-up time.
Wake-up with alarm tone:
1) Rotate the volume control º in the quiet direction until it reaches the stop - make sure you can hear
the volume control engage.
2) Slide the On/Off switch ƹ into the AUTO position. A dot ¹ lights up on the display ¿ to indicate that
the alarm is switched on.
3) The radio will sound an alarm tone at the set wake-up time.
4) The alarm tone will switch itself off automatically after approx. 2 hours. Of course, you can switch of
the alarm tone before this. Further details can be found in the next section.
Switching off the alarm tone:
• Press the wake-up time button ³ to switch off the alarm tone.
• The set wake-up time remains unaltered. The set time for the alarm signal or the radio is retained
for the next day.
• To switch off the alarm function, slide the On/Off switch ƹ into the OFF position.
• Do not forget to reset the volume control if you wish to listen to the radio in the meantime.
6