Beko BDK 870 - Manual (Page 50)

46
Setting the DPOF
The Digital Print Order Format (DPOF) setting allows you to select images on the
memory card for printing and specify the number of print copies in advance using the
camera. This is extremely convenient for sending the images to a photo developing
service or for printing on a direct print function compatible printer.
Turn the power on, and set the
camera to the PLAYBACK
mode (
page 13).
Open the menu.
y Press
the
MENU button, then
use the four-way control to
select
DPOF (
) and press
the
SET button.
s
Press or to select [Single], then press the SET button.
y To set the DPOF setting for all images, select [All] in this step.
y To reset all DPOF settings to initial default, select [Reset] in this step.
Press or to select the image you want to print out.
Set the number of copies.
y Press or to specify the number of copies.
y The number of copies can be set from 0 to 30.
y To cancel this image DPOF setting, set the number of copies to 0.
Print the date stamp out.
y Press SCN button to set the date stamp of current image. Press SCN
button again to turn off date stamp.
y Repeat step 4~6 to other images for printing.
After you finished all image settings, press the SET or MENU button to
apply it.
3
1
2
4
5
6
7