Bushnell 20 5105 - Manual (Page 8)

UNIT OF MEASURE OPTIONS
The Pro
™ 1600 can be used to measure distances in yards or meters. The unit of measure indicators are located in the
lower right portion of the LCD. To select between yards and meters, quickly press and release the POWER button
to turn on the unit (on top of the unit), look through the eyepiece, depress the “MODE” button (left side of the
eyepiece) and hold it down for approximately 5 seconds. If you are changing from yards to meters, a change in unit
of measure will be indicated by the illumination of the M for meter indicator while the Y for Yard indicator is turned
off. If you are changing from meters to yards, the opposite will occur. The Pro
™ 1600 will return to the last unit of
measure setting used each time the unit is turned on.
ACTIVE LASER
Crosshairs surrounding the aiming circle indicate that the laser is being transmitted. Once a range has been acquired,
you can release the power button. The crosshairs surrounding the circle will disappear once the power button has been
released (i.e. the laser is no longer being transmitted).
SELECTIVE TARGETING™ MODES
The Pro
™ 1600 was especially designed with golfers in mind. The selective targeting modes allow you to adjust the
performance parameters of the unit to suit your specific situation and environment. To move from one mode to
another, press the POWER button once to turn on the unit. While looking through the eyepiece, press the MODE
button and quickly release. The different targeting modes available and mode indicators are listed below:
PinSeeker (LCD Indicator -
) Ever have trouble getting distance to the flag? This advanced mode allows easy
acquisition of the flag without inadvertently getting distances to background targets (i.e. trees) that have stronger
signal strength.
6